DAN NTP TECHNOLOGY DAD THUNDER CORE AX Center, Installation Manual

Page: 15 / 19

Installation Guide AX Center
Doc no. AXCNTR-8001-A-4 Rev. date 221023 Page 15 of 19
Analogue I/O Connections on
optional DAD I/O Cards
Analogue I/O 25 pole female D-sub connectors
.
These are interfaced via 25 pole D-sub connectors on the card, which
is accessible from the rear panel of the AX Center chassis.
This connector type is used both for the analogue Line input card and
the analogue Line output.
Below, the connection for the 25 pole D-sub connector is listed. The
pinning is in accordance with the proprietary standard by the
company
Tascam . The pinning is for each group of 8 channels.
Connections channel 1-8
Pin no Func. Pin no Func.
1 AIN/OUT 8 + 14 AIN/OUT 8 -
2 GND 15 A/IN/OUT 7 +
3 AIN/OUT 7 - 16 GND
4 AIN/OUT 6 + 17 AIN/OUT 6 -
5 GND 18 AIN/OUT 5 +
6 AIN/OUT 5 - 19 GND
7 AIN/OUT 4 + 20 AIN/OUT 4 -
8 GND 21 AIN/OUT 3 +
9 AIN/OUT 3 - 22 GND
10 AIN/OUT 2 + 23 AIN/OUT 2 -
11 GND 24 AIN/OUT 1 +
12 AIN/OUT 1- 25 GND
13 N.C.
Pin out