Installation Guide AX Center
Doc no. AXCNTR-8001-A-4
Rev. date 221023
Page 14 of 19
MADI connectors
Coaxial BNC connector for input and output of MADI signals via
75Ohm Coax cables.
Sync connectors
Coaxial BNC connector for Clock input synchronization, and Word
Clock output
The input clock format can be Word Clock or Video Black
and Burst (VBB)
ADAT Connectors
Two TOSLINK Inputs and two outputs. Input and output
connectors support ADAT.
S/PDIF is supported on input only.
Analogue Output
Connections
Analogue output on Jack Connectors
.
Two sets of ¼” jack connectors for analogue stereo outputs are
available. The connections are balanced and with the following
pinning:
Pin 1 (tip).
Pin 2 (ring).
Signal-
Pin 3 (body)
Signal GND
