manualshive.com logo in svg

Dan Dugan Sound Design E, User Manual, Page: 28 / 48

Share
Download
Dan Dugan Sound Design E User Manual Download Page 28

Dugan Model E User Guide

Web Control Panel

28

5.2

Operation

Figure 5-4 

Web Control Panel

The web control panel provides controls not available when using the Model E as a 
standalone device (See Chapter 4: 

Operation

 for standalone operation): 

•

The 

auto mix weight 

controls set the relative sensitivity of the automatic mix for 

the channels in use.

•

The 

manual

, 

auto

, and 

mute

 buttons transition each channel smoothly between 

modes.

•

The momentary master

 

override

 button fades up the channels whose 

override

 func-

tion is active and fades down the other channels. The automatic mix resumes when 
the button is released.

•

The master

 

preset

 

button sets each channel to the mode indicated by its 

preset

 

mode LED. Powering up the system also performs this function.

Set the unused channels to the 

mute

 mode. Use each channel’s 

preset

 button to set the 

preset mode lights to match the modes of the channels. 

NOTE: The Model E continues to perform automatic mixing if the Web Control Panel 

is disconnected.

Summary of Contents for E

















































Reviews:

No comments