Dugan Model E-3A User Guide
26
To check or change the word clock source:
1.
Use the front panel to go to
MENU.
2.
Select
Channels Setup.
3.
Navigate to the right to the field under
Sync
.
4.
Rotate the knob to select the desired source.
WORD CLOCK IN
is unterminated when shipped. If you are receiving word clock over a
very long cable (> 20 ft), remove the top lid and move the switch to
ON
(see below)
.
Figure 4-3
Word clock input termination switch
Power
A power connector accepts a locking power cable. In an emergency, the Model E-3A
can accept power supplies within the range 12–24 VDC, 2 A (minimum), center pin
positive.
Mix Matrix Outputs
An internal mix matrix can route processed or unprocessed inputs to six mix buses
that can be assigned to any audio outputs.
For more information on using mix buses, see
Mix Buses
on page 49.
Summary of Contents for E-3A
