Reference
Version
Document
Lang.
Page
3000-ENG
08.01.2018
3000 DAN DRYER Hand dryer.
Maintenance and service manual
UK
4 of 12
DAN DRYER A/S • Alsikevej 8 • DK-8920 Randers NV • www.dandryer.com • [email protected]
Sensing range adjustment:
The sensing range of the hand dryer is preset by the manufacturer.
We recommend that the sensing range is NOT adjusted by the user.
If you wish to modify the sensing range anyway, please proceed according to the following instructions:
1.
Cut off the power supply to the hand dryer
2. Remove the cover by loosening the Allen screws at the
bottom of the housing. This can be done with the special
Allen key originally supplied with your hand dryer.
3. The sensing range adjusting screw is located as shown
in Fig. 1.
Use a tiny screwdriver to carefully turn the adjusting screw.
a. Turn clockwise to lengthen the sensing range.
b. Turn counter-clockwise to shorten the sensing range.
4. Remount housing and test run the hand dryer.
Remove the
cover screws
Turn clockwise to lengthen
the sensing range
Turn counter-clockwise to
shorten the sensing range
Air speed adjustment:
If a lower noise level is desired, air speed may be
adjusted by turning the adjusting screw located
inside at the bottom of the hand dryer cover.
Turn clockwise to increase air
speed and anti-clockwise to
reduce air speed.
Fig. 1.
