Xtium-CL PX4 User's Manual
Technical Specifications
•
60
Technical Specifications
Xtium-CL PX4 Board Specifications
Digital Video Input & Controls
Input Type
Camera Link Specifications Rev 2.0 compliant;
1 Full or 1 Medium or 1 Base or 1 80-bit
(using SDR-26 Camera Link connectors — MiniCL)
Supports PoCL cameras in:
Camera Link Base, Medium, Full/80-Bit Configurations
Common Pixel Formats Camera Link tap configuration:
8, 10, 12, 14 and 16-bit mono
8, 10, 12-bit RGB
8, 10, 12-bit Bayer
8-bit Bi-Color
Tap Format Details
1 Tap – 8/10/12/14/16-bit mono
2 Taps – 8/10/12-bit mono
3 Taps – 8/10/12-bit mono
4 Taps – 8/10/12-bit mono
8 Taps – 8-bit mono
8 Taps – 10-bit mono
10 Taps – 8-bit mono
1 Tap – 8/10/12-bit RGB
2 Taps – 8-bit RGB
Full packed 8-bit RGB/BGR
80-bit packed 8-bit RGB/BGR
80-bit packed 8-bit Bi-Color
Scanning
Area scan and Line scan: Progressive, Multi-Tap, Tap reversal,
Alternate Tap Configuration
Scanning Directions
Left to Right, Up-Down,
From Top
Resolution
note: these are Xtium-CL
PX4 maximums, not
Camera Link
specifications
Horizontal Minimum:
8 Pixels per tap (8-bits/pixel)
Horizontal Maximum:
8-bits/pixel x 64k Pixels/line
16-bits/pixel x 32k Pixels/line
32-bits/pixel x 16k Pixels/line
64-bits/pixel x 8k Pixels/line
Vertical Minimum:
1 line
Vertical Maximum:
up to 16,000,000 lines—for area scan sensors
infinite line count—for linescan sensors
Pixel Clock Range
20 MHz to 85 MHz
Synchronization
Minimums
Horizontal Sync minimum:
1 pixel
Vertical Sync minimum:
1 line
Image Buffer
Available with 512 MB
Bandwidth to Host
System
Approximately 1.7GB/s (maximum obtained is dependent on firmware
loaded and PC characteristics)
Serial Port
Supports communication speeds from 9600 to 921600 bps
