Dalsa Shad-o-Scan 3001, User Manual

Page: 28 / 52

28
Shad-o-Scan 3001/4501 Detector Teledyne DALSA
Sensor Control
The Shad-o-Scan Detector controls, as shown by CamExpert, groups the detector-specific
parameters. The features which are underlined link to the paragraph which describes
these features in more detail.
Display Name Feature Acc Description
Read-Out Mode Framerate RW Framerate in Hz Trigger Mode off
Exposure Exposure time in us Trigger Mode off
Binning list Binning 1x1 Read the full array of the image sensor
Binning 2x1 Bins in sensor vertically
Binning 2x2
Bins in sensor vertically and digital in FPGA for
horizontally direction
Binning 4x4
Bins in sensor vertically and digital in FPGA for
horizontally direction
Trigger Mode Mode
TriggerModeTrigger
Mode
RW
Controls by what source initiate and how the
sensor read-out
off Synchronous Detector uses internal timing
on Trigger Source
Read-out of sensor occurs on falling-edge of
trigger input
Acquisition Frame Rate
(in Hz) Acquisition Frame
Rate (in Hz)
RW Framerate in Hz in Trigger Mode off
Exposure Time (in us) ExposureTime RW Exposure time in us in Trigger Mode off
Offset Offset RW
Sensor dark ADC offset level; based on full
scale of sensor
0% Offset0pct 0
1.95% Offset1pct95 1,95% of 16384
3.9% Offset3pct9 3.9% of 16384
6.25% Offset6pct25 6.25% of 16384
Full Well Selection FullWell RW
Selects the full well of the pixels in the sensor
array
High Full Well HighFullWell Large full well capacitor
Low Full Well LowFullWell Small full well capacitor (default)
Horizontal Offset Horizontal Offset RW
Horizontal start position for ROI mode; min 0,
max 3072, multiple of 2
Vertical Offset Horizontal Offset RW
Vertical start position for ROI mode; min 1, max
64, multiple of 2