Dalsa S3-10-01k40-R, User Manual

Page: 91 / 115

Spyder 3 CL User's Manual 91
DALSA 03-032-20008-00
Mnemonic Syntax Parameters Description
set fpn coeff
sfc
x i
Set the FPN coefficient.
x
=pixel number within the range
1
to
sensor pixel count
.
i
= FPN value within the range
0
to
2047
(12-bit LSB).
set lower threshold
slt
i
The pixels below the lower threshold
are checked for and reported in the
end-of-line sequence in a range from
0
-
4095
.
set prnu coeff
spc
x i
Set the PRNU coefficient.
x
=pixel number within the range
1
to
sensor pixel count
.
i
= PRNU value within the range
0
to
28671
.
set readout mode
srm
i
Set the readout mode in order to clear
out dark current charge in the vertical
transfer gates before the sensor is read
out.
0
= Auto.
1
= Dark current clear.
2
= Immediate readout. Does not clear
dark current.
set subtract background
ssb
t i
Subtract the input value from the
output signal.
t
= Tap value.
0
for all taps or
1
to
number of camera taps for individual tap
selection.
i
= Subtracted value in a range from
0
to
4095
.
set sync frequency
ssf
i
Set the frame rate to a value from
300
Hz to
36000
Hz (2k model) or
300
Hz to
68000
Hz (1k model). Value
rounded up/down as required.
set system gain
ssg
t i
Set the digital gain.
t
= tap selection, either
1
to
2
, or
0
for
all taps
i
= Digital gain in a range from
0
to
65535
. The digital video values are
multiplied by this number.
set sensitivity mode
ssm
i
Sets the camera’s sensitivity mode
where i is:
0
= Low sensitivity mode
1
= High sensitivity mode
2
= Tall pixel mode
set upper threshold
sut
i
The pixels equal to or greater than the
upper threshold are checked for and
reported in the end-of-line sequence in
a range from
0
-
4095
.