Dalsa S3-10-01k40-R, User Manual

Page: 84 / 115

84 Spyder 3 CL User's Manual
03-032-20008-00 DALSA
Syntax Parameters Description
get sbr
Returns the speed of camera serial communication port.
get scb
Returns the set cable parameter.
get scd
Returns the ccd shift direction where:
0 =
Forward CCD shift direction.
1 =
Reverse CCD shift direction.
2 =
Externally controlled direction control via CC3.
get sdo
t
Returns the digital offset value in DN for the tap
indicated.
t
= Tap value.
0
for all taps or
1
to
2
for individual tap
selection.
get sem
Returns the current exposure mode:
2 =
Internal SYNC, internal PRIN, programmable line
rate and exposure time using commands
ssf
and
set
3 =
External SYNC, internal PRIN, maximum exposure
time
4
= Smart EXSYNC
5
= External SYNC and PRIN
6
= External SYNC, internal PRIN, programmable
exposure time
7 =
Internal programmable SYNC, maximum exposure
time. Factory setting.
8
= Internal SYNC, internal PRIN, programmable
exposure time. Maximum line rate for exposure time.
get set
Returns the current exposure time in µs.
get sfc
x
Returns the FPN coefficient for the pixel number idicated.
x
=pixel number within the range
1
to
sensor pixel
count
.
get slt
Returns the current lower threshold value.
get spc
x
Returns the PRNU coefficient for the specified pixel
number.
x
=pixel number within the range
1
to
sensor pixel
count
.
get srm
Returns the readout mode:
0
= Auto.
1
= Dark current clear.
2
= Immediate readout. Does not clear dark current.
get ssb
t
Returns the current background subtract value.
t
= Tap value.
0
for all taps or
1
to
2
for individual tap
selection depending on camera model.
get ssf
Returns the current line/frame rate in Hz.
get ssg
t
Returns the current digital gain setting.
t
= tap selection, either
1
to
2
depending on camera
model, or
0
for all taps