Piranha4 8K Color Camera User's Manual
37
Teledyne DALSA
03-032-20156-00
GenICam parameters to set:
I / O Controls > Trigger Mode > On
Sensor Control > Exposure Mode > Trigger Width
Warning!
When running external line rate and external exposure time, the line rate must not exceed 1 /
(exposure time + 1,500 ns). Under these conditions the exposure time will become indeterminate and
result in image artefacts. This is not the case when running internal exposure control.
3. External Line Rate, Programmable Exposure Time
In this mode, the line rate is set externally with the falling edge of EXSYNC generating the rising edge of
a programmable exposure time.
GenICam parameters to set:
I / O Controls > Trigger Mode > On
Sensor Control > Exposure Mode > Timed
maximum line rate =
1
(exposure time + low time*)
*Exposure time must be greater than 6 µs and low time greater than 1,500 ns
