Piranha4 8K Color Camera User's Manual
35
Teledyne DALSA
03-032-20156-00
Factory Settings
The factory setting is the camera settings that were shipped with the camera and which loaded during the
camera‘s first power-up. To load or restore the original factory settings, at any time, select the
Factory
Setting
parameter and then select the
User Set Load
parameter.
Note
: By default, the user settings are set to the factory settings.
Default Setting
Either the Factory or one of the User settings can be used as the Default Setting by selecting the set in the
User Set Default Selector. The chosen set automatically becomes the default setting and is the set loaded
when the camera is reset of powered up.
Camera Link Configuration
Name
Taps
SPF*
Cables
Base
3
8
1
Medium
6
8
2
Full (Green Only)
8
8
2
Deca
10
8
2
*Set Pixel Format (number of bits per pixel)
Trigger Modes
The camera‘s image exposures are initiated by a trigger event. The trigger event is either a programmable
internal signal used in free running mode, an external input used for synchronizing exposures to external
triggers, or a programmed function call message by the controlling computer. These triggering modes are
described below.
Internal trigger (trigger disabled):
The camera free-running mode has a programmable internal
timer for line rate and a programmable exposure period.
External trigger (trigger enabled):
Exposures are controlled by an external trigger signal. The
external trigger signal is the Camera Link control line CC1.
Exposure Controls
Exposure Control modes define the method and timing of how to control the sensor integration period.
The integration period is the amount of time the sensor is exposed to incoming light before the video
frame data is transmitted to the controlling computer.
Exposure control is defined as the start of exposure and exposure duration.
The start of exposure can be an internal timer signal (free-running mode) or an external trigger
signal.
The exposure duration can be programmable (such as the case of an internal timer) or controlled by the
external trigger pulse width.
The camera can grab images in one of three ways. You determine the three imaging modes using a
combination of the Exposure Mode parameters (including I/O parameters), Exposure Time and Line Rate
parameters.
