90
•
Appendix A: GenICam Commands
Linea HS Series Camera User's Manual
Appendix A: GenICam
Commands
This appendix lists the available GenICam camera features. The user may access these features
using the CamExpert interface or equivalent GUI.
Features listed in the description table but tagged as
Invisible
are typically reserved for Teledyne
DALSA Support or third-party software usage, and not typically required by end user applications.
The following feature tables describe these parameters along with their view attributes and in
which version of the device the feature was introduced. Additionally, the Device Version column will
indicate which parameter is a member of the DALSA Features Naming Convention (using the tag
DFNC
), versus the GenICam Standard Features Naming Convention (SFNC tag not shown).
In the CamExpert Panes, parameters in gray are read only, either always or due to another
parameter being disabled. Parameters in black are user set in CamExpert or programmable via an
imaging application
Note:
The CamExpert examples shown for illustrative purposes and may not
entirely reflect the features and parameters available from the camera model used
in your application.