Linea HS 32k CMOS TDI Cameras
Appendix A: GenICam Commands
57
Image Format Control Category
The camera’s Image Format controls, as shown by CamExpert, group parameters used to configure
camera pixel format, image cropping, binning and test pattern generation features.
Figure 24: Image Format Panel
Image Format Control Feature Description
Display Name
Feature
Description
View
Pixel Format
PixelFormatr
Output image pixel coding format of the sensor. Beginner
Mono 8
Mono8 8-bit monochrome format is used when
processesing each color separately.
Pixel Size
PixelSize
Total size in bits of an image pixel. Read-only.
Guru
8 Bits/Pixel
Bpp8 8 Bits / Pixel.
Pixel Coding Filter
PixelCodingFilter
Indicates the type of color filter used in the
camera. Read only.
Beginner
DFNC
None
Mono No pixel coding filter when pixel format is Mono
8.
Horizontal Offset
OffsetX
Output image horizontal offset from the origin.
This is zero for color cameras.
Read only
Beginner
Output Width
Width
Horizontal width of the pixels output.
Read only
Beginner
Height
Height
Height of the image provided by the device (in
object pixels). 1 to 3.
Read only.
Beginner
Test Pattern
TestImageSelector
Selects the type of test image that is sent by
the camera.
Note. Grey images are displayed so that any bit
error will immediately be apparent as a color.
Beginner
Off
Off Selects sensor video to be output
Each Tap Fixed
EachTapFixed Selects a grey scale value that is increased
every 512 pixels.
Grey Horizontal Ramp
Grey Horizontal Ramp Selects a grey scale ramp
