44
•
Operational Reference
Nano Series GigE Vision Camera
Any Edge
AnyEdge The trigger is considered valid on any edge of the
line source signal (after any processing by the line
inverter module).
Level High
LevelHigh The trigger is considered valid on the high level of
the line source signal.
Level Low
LevelLow The trigger is considered valid on the low level of
the line source signal.
Trigger Delay
TriggerDelay
Specifies the delay in microseconds to apply after
receiving the trigger and before activating the
triggerEvent. (min=0, max=2000000)
1.00
Beginner
Trigger Overlap
TriggerOverlap
States if a trigger overlap is permitted with the
Active Frame readout signal. This read only feature
defines if a new valid trigger will be accepted (or
latched) for a new frame.
1.00
Guru
Off
Off No trigger overlap is permitted.
ReadOut
ReadOut Trigger is accepted immediately after the
exposure period.
Line Selector
LineSelector
Selects the physical line (or pin) of the external
device connector to configure.
1.00
Beginner
Line 1
Line1 Index of the physical line and associated I/O
control block to use. Pin 5 is the Input Signal and
Pin 3 is the common Ground on the I/O connector.
Line 2
Line2 Index of the physical line and associated I/O
control block to use. Pin 7 is the Input Signal and
Pin 3 is the common Ground on the I/O connector.
Line 3
Line3 Index of the physical line and associated I/O
control block to use. Pin 6 is the Output Signal and
Pin 4 is the common output power on the I/O
connector.
Line 4
Line4 Index of the physical line and associated I/O
control block to use. Pin 8 is the Output Signal and
Pin 4 is the common output power on the I/O
connector.
Line Name
lineName
Description of the physical Pin associated with the
logical line.
1.00
Beginner
DFNC
Input 1
Input 2
Input1
Input2
Associated with the logical line Input 1
Associated with the logical line Input 2
Output 1
Output 2
Output1
Output2
Associated with the logical line Output 1
Associated with the logical line Output 2
Line Format
LineFormat
Specify the current electrical format of the selected
physical input or output. (RO)
1.00
Expert
Opto-Coupled
OptoCoupled The line is opto-Coupled.
Line Mode
LineMode
Reports if the physical Line is an Input or Output
signal. (RO)
See Input Signals Electrical Specifications.
See Output Signals Electrical Specifications.
1.00
Expert
Input
Input The line is an input line.
Output
Output The line is an output line.
Line Status
LineStatus
Returns the current status of the selected input or
output line.
1.00
Expert
False / True
Line Status All
LineStatusAll
Returns the current status of all available line
signals, at time of polling, in a single bitfield. The
order is Line1, Line2, Line3, ...
1.00
Expert
Line Inverter
LineInverter
Control to invert the polarity of the selected input
or output line signal.
1.00
Beginner
False / True
Input Line Detection Level
lineDetectionLevel
Specifies the voltage threshold required to
recognize a signal transition on an input line.
1.00
Beginner