Dalsa Genie Nano Series Page 24 User Manual Download

Page: 24 / 113

•

Using Nano with Sapera API

Nano Series GigE Vision Camera

Installation

Note: to install Sapera LT and the GigE Vision package, logon to the workstation as an administrator or

with an account that has administrator privileges.

When Genie Nano is used in a Sapera development environment, Sapera LT 8.01 needs to be

installed, which automatically provides all GigE Vision camera support including TurboDrive.
If no Sapera development is required. then the Sapera LT SDK is not needed to control the

Linea GigE camera. Sapera runtime with CamExpert provides everything to control the camera.

Procedure

•

Download and install Sapera 8.01 which automatically provides GigE Vision support with

Teledyne DALSA TurboDrive™ technology.

•

Optional: If the Teledyne DALSA Sapera LT SDK package is not used, click to install the Genie

Nano firmware and user manuals only. Follow the on screen prompts.

•

Connect the camera to an available free Gigabit NIC.

Refer to Sapera LT User’s Manual concerning application development with Sapera.

Note: The Teledyne DALSA Sapera CamExpert tool (used throughout this manual to describe Genie Nano

features) is installed with either the Sapera LT runtime or the Sapera LT development package.

Camera Firmware Updates

Under Windows, the user can upload new firmware, downloaded from Teledyne DALSA support,

using the

File Access Control

features provided by the Sapera CamExpert tool.

Firmware via Linux or Third Party Tools

Consult your third party GigE Vision software package for file uploads to the connected device.

Summary of Contents for Genie Nano Series


















































































































Search results

Summary of Contents for Genie Nano Series

Reviews:

Related manuals for Genie Nano Series

Brands by name

Popular brands

Dalsa Genie Nano Series, User Manual

Search results

Summary of Contents for Genie Nano Series

Reviews:

Related manuals for Genie Nano Series

Brands by name

Popular brands