Falcon2 4M, 8M, and 12M Camera User's Manual
37
Teledyne DALSA
03-032-20107-01
to ou tp u t.
Sets the w id th (d u ration) of the ou tp u t
line pulse in microseconds (μs). The Line
Mod e featu re m u st be set to Ou tp u t.
Ou tp u t Line
Pu lse Du ration
Min 0 µs, Max 8388608 µs
Ou tp u t Line that are cu rrently in
Softw are Latch control w ill only set w ith
the valu e in Ou tp u t Line Valu e w ith the
Ou tp u t Line Softw are Com m and featu re
Ou tp u t Line
Softw are Latch
Control
Off, changes to the ou tp u t line valu e are
ap p lied im m ed iately.
On, changes to the ou tp u t line valu e are
ap p lied w hen the Ou tp u t Line Softw are
Com m and is triggered .
Selects the state of the ou tp u t on the
selected line. The Line Mod e featu re
m u st be set to Ou tp u t and the Ou tp u t
Line Sou rce featu re m u st be set to
Softw are Controlled . The Valu e w ill be
ap p lied im m ed iately if the Ou tp u t Line
Softw are Latch Control featu re is equ al
to OFF.
Ou tp u t Line
Valu e
-Active
-Inactive
Ou tp u t Line Softw are Com m and
Ou tp u t Line
Softw are
Com m and
Control Gain and Black Level
The Falcon2 cameras provide gain and black level adjustments in the digital domain for the CMOS sensor.
The gain and black level controls can make small compensations to the acquisition in situations where
lighting varies and the lens iris cannot be easily adjusted. The user can evaluate gain and black level by using
CamExpert.
The parameters that control gain and black level are grouped together in the Sensor Controls set.
Sensor Controls
Parameter
Description
Gain Selector
Select the channel to control the gain for
All d igital channels of tap s
Gain
Set the gain as an am p lification factor ap p lied to the vid eo signal
0 to 8x.
Black Level Selector
Ad ju st the black level
All d igital channels or tap s
Black Level
Ap p ly a d igital su btract before FPN correction. -200 to 800 DN (10 bit).
Image Size
To set the height of the im age, and therefore the nu m ber of lines to scan, u se the p aram eters grou p ed
u nd er the Im age Form at Control set.
All manuals and user guides at all-guides.com
