18
•
Installing Xtium2-CL MX4
Xtium2-CL MX4 User's Manual
Xtium2-CL MX4 Firmware Loader
The Device Manager-Firmware Loader program automatically executes at the end of the driver
installation and on every subsequent reboot of the computer. It will determine if the Xtium2-CL
MX4 requires a firmware update. If firmware is required, a dialog displays. This dialog also allows
the user to load firmware for alternate operational modes of the Xtium2-CL MX4.
Important:
In the rare case of firmware loader errors please see
Firmware Update: Automatic Mode
Click
Automatic
to update the Xtium2-CL MX4 firmware. The
Xtium2-CL MX4
supports various
firmware configurations with the default being a Full, Medium, or Base camera.
See
User Programmable Configurations
for details on all supported modes, selected via a manual
update of alternative firmware.
With multiple Xtium2-CL MX4 boards in the system, all are updated with new firmware. If any
installed Xtium2-CL MX4 board installed in a system already has the correct firmware version, an
update is not required. In the following screen shot, a single Xtium2-CL MX4 Full board is installed
and ready for a firmware upgrade.
Figure 1: Automatic Firmware Update
