12
•
Quick Start Setup & Installation
Xtium2-CL MX4 User's Manual
To complete the installation,
update the Xtium2-CL MX4 firmware
when prompted; select Automatic to
update with the default configuration (Full Camera Link) or Manual to select another option (2 Base Camera
Link or 80-Bits Camera Link).
Reboot when all software and board drivers are installed.
Launch
to verify the installation; the board should be present in
the list of available devices.
Connect camera(s) to the board Camera Link connectors. Ensure cameras are properly
powered.
If using PoCL, use CamExpert to enable the PoCL feature in the the Basic Timing
category.
