Review of Camera Performance and Features
•
45
Changing Output Configuration
Pixel Format
See the section Image Format Control Category in Appendix A for GenICam features associated
with this section and how to use them
Relevant Features:
Mono8Color Combinations (Color ID)
Approximate Maximum Line Rate Enhancement
Blue Only
2.8x
Green Only
2.8x
Red Only
2.8x
NIR Only
2.8x
Blue & Green Only
1.75x
Blue & Red Only
1.75x
Green & Red Only
1.75x
NIR & Blue Only
1.75x
NIR & Green Only
1.75x
NIR & Red Only
1.75x
Blue, Green & Red
1.25x
NIR, Blue, Green & Red
1x
ML-FC-08K07N-00-R relative speed increases
Using Two CLHS Cables
See the section Image Format Control Category in Appendix A for GenICam features associated
with this section and how to use them. The SFP+ camera models support up to 2 fiber optic cables.
The 16K ML-HC model only supports 1 CX4 output connector.
Relevant Features:
The ML-FC cameras have two CLHS compliant connectors. Control / Data1 is assigned as the
master with Data 2 connector as the slave. Use
the ‘Next CLHS Device Configuration’ to select the
desired number of cables (not relevant for the 16K). This feature also controls lane selection. The
Next CLHS Device Configuration becomes active after power cycling the camera or reconnecting
the cables.
