Dalsa 1M28-SA User Manual Download Page 5

Page: 5 / 54

1M28 and 1M75 User’s Manual

PRELIMINARY

DALSA

03-32-00525-03

Introduction to the 1M28

Introduction to the 1M28
and 1M75

and 1M75

1.1 Camera Highlights

Features

•

“Stop Action” (SA) imaging.

•

Exposure control.

•

1-Megapixel (1024 x 1024) resolution.

•

Up to 75 frames per second (fps).

•

CMOS image sensor.

•

LINLOG™ output response.

•

Windowing capability for increased frame rates.

•

CE compliant, shock and vibration tested.

•

Single 5V power supply input.

•

Robust and compact.

Programmability

•

Programmable features include: gain, offset, line rates, trigger mode, test pattern
output, and camera diagnostics.

•

DLLs for integrating camera control functions into your system. The DLLs require a
framegrabber that has a virtual COM port, or a COM port input.

Summary of Contents for 1M28-SA























































Search results

Summary of Contents for 1M28-SA

Reviews:

Related manuals for 1M28-SA

Brands by name

Popular brands

Dalsa 1M28-SA, User Manual

Search results

Summary of Contents for 1M28-SA

Reviews:

Related manuals for 1M28-SA

Brands by name

Popular brands