background image

MicroStreamer-PoE

www.dallmeier.com

2

Information about copyright, trademarks, design patents

© 2010 Dallmeier electronic

All  rights  reserved.  This  document  may  not  be  copied,  photocopied,  reproduced,  translated, 

transferred to an electronic medium or converted to a machine-readable form either whole or in 

part without first receiving written permission from Dallmeier electronic GmbH & Co.KG.

We reserve the right to make technical modifications.

The manufacturer accepts no liability for damage to property or pecuniary damages arising due 

to minor defects of the product or documentation, e.g. print or spelling errors, and for those not 

caused by intention or gross negligence of the manufacturer.

Dallmeier electronic GmbH & Co.KG

Cranachweg 1, D-93051 Regensburg, Germany

www.dallmeier.com

[email protected]

All trademarks identified by ® are registered trademarks of Dallmeier electronic.

All trademarks identified by *) are trademarks or registered trademarks of the following owners:

Adobe and Flash of Adobe Systems Incorporated headquartered in San Jose, California, USA

IBM of International Business Machines Corporation headquartered in Armonk, New York, USA

Microsoft,  ActiveX,  DirectX,  Internet  Explorer,  Windows  and  Windows  Vista  of  Microsoft  Corporation  headquartered  in  Redmond,  

Washington, USA

Third-party trademarks are named for information purposes only.

Dallmeier electronic respects the intellectual property of third parties and always attempts to ensure the complete identification of third-party 

trademarks and indication of the respective holder of rights. In case that protected rights are not indicated separately, this circumstance is 

no reason to assume that the respective trademark is unprotected.

Summary of Contents for MicroStreamer-PoE






































































Reviews: