MicroStreamer-PoE
www.dallmeier.com
15
6 Installation and commissioning
The MicroStreamer-PoE can be installed on ceiling/wall brackets or freely positioned. How-
ever, it must be ensured that the connection panel is freely accessible.
WARNING
Device falling off
Danger of injury
Ensure that the device is securely positioned or mounted.
Electric shock hazard
Danger of death or serious injury
Disconnect the power supply unit from the mains socket before connect-
ing the device.
Danger of death from lightning strike
Do not connect the video cable during a thunderstorm.
NOTICE
Possible damage to the device caused by inappropriate mounting equip-
ment or incorrect installation.
The length of the tripod screw must not exceed 7 mm.
Pay attention to the manufacturer’s documentation when installing the
device into a weather-proof housing.
If required, mount the MicroStreamer-PoE on a ceiling/wall bracket using the ¼" tripod
socket (
C
) and an appropriate tripod screw.
Connect the analogue camera with a coaxial video cable to the BNC socket (
D
).
Connect the MicroStreamer-PoE via LAN port (
I
) to the network.
For video preview purposes, connect the delivered adapter cable to the analogue video
preview output (
G
) and a CVBS monitor.
If Power over Ethernet (PoE) is NOT available, proceed as follows:
In order to comply with the UL requirements, you have to use a UL-certified, limited power
source (LPS) Class 2 power supply unit.
Connect the MicroStreamer-PoE via power input terminal (
E
) to an appropriate power
supply unit.
Connect the power supply unit to the mains socket.
The Power LED (
F
) illuminates and the MicroStreamer-PoE boots up.
The MicroStreamer-PoE can be configured via network after approx. 45 seconds.
