dallmeier DF5200HD-IR-ANPR, Commissioning

Page: 30 / 44

DF5200HD-IR-ANPR
30 www.dallmeier.com
❻
Fig. 11
➡ Connect your PoE switch or PoE injector (midspan device) to the
mains socket and switch it on.
➡
Establish an Ethernet connection to the camera with a web browser
(see chapter “Connection and Login” on page 34).
➡
Log in to the camera (see section “Login” on page 36).
➡ Open the “Lens control” dialog of the camera.
➡ Align the camera with your scene (loosen the respective hexagon
socket head cap screw with the delivered hex key as illustrated in
Fig. 11 and Fig. 12 and tighten it again when finished).
➡
Adjust the focus position.
➡ Repeat the last two steps until the captured scene meets your
requirements.