DF3000AXS
25
Dallmeier electronic
z
Night Control
Night Control = Off
The camera is set to day mode. Night mode is deactivated.
Night Control = On
This setting immediately changes the camera to night mode, regardless of the prevailing
light conditions.
Night Control = Auto
This setting automatically switches the camera to night mode at certain light conditions.
z
Night Mode
With Night Mode, you can select whether the camera will take color or black-and-white
images at night.
Night Mode = B/W (black-and-white) is set by default for the DF3000AXS.
z
Night: max. Gain
Night: max. Gain allows you to fix the limit for the maximum amplitude of the video
signal in night mode.
8.4
Image Functions
The Image Functions area allows you to make settings concerning the image quality.
8.4.1
Progressive Scan
z
Progressive Scan = Off
Two fields with differing time index are successively
captured and transmitted (interlaced scanning).
Due to the different points in time of capturing within one
frame the “interlace effect” may occur with moving objects.
Compared to progressive capture rapid movements are
displayed more smoothly and in a less jerky manner by
twice as much motion phases per second.
z
Progressive Scan = On
The frame is captured at one point in time.
Via PsF method (Progressive segmented Frame) the captured frame is segmented
in two fields with the same time index, which then are transmitted one after another.
Compared to interlaced scanning, every reassembled frame has only one motion phase.
The “interlace effect” is thus prevented, whereas rapid movements are displayed in a
more jerky manner.
-------- Image Functions ---------
Previous Page.
>
Progressive Scan
< Off >
Backlight
Off
Digital Zoom
On..
White Balance
ATW..