50
COMMISSIONING – DDZ5000HD-DN/IR Series | REV. 1.0.1 | © 2019 Dallmeier
➡
Connect the network cable to a suitable network switch.
➡
Connect the power cable to a suitable power supply unit (observe
the chapter “Pin Assignment” on page 54).
➡
Connect the used power supply unit to the mains socket.
The device starts and is ready for operation after a few minutes.
➡
Check the live image of the device on a monitor.
➡
If necessary, pan the device carefully and with normal force in the
required direction (first turn the locking screw of the Mountera®
Quick-Lock System by 180° in counterclockwise direction and tighten
it again when finished).
⓳
Fig. 30
Summary of Contents for DDZ5000HD-DN/IR Series
