dallmeier DDF51 0HDV-DN Series, Commissioning

Page: 41 / 60

© 2018 Dallmeier | www.dallmeier.com 41
Commissioning DDF51(X)0HDV-DN-IM
➡ Connect the required cables to the respective interfaces of the camera
module (if necessary, see chapter “Pin Assignment – Interface Board Series
5100” on page 44).
The optional interfaces are only available if the device is equipped ex factory
with the “Interface Board Series 5100”.
To connect cables to the “Interface Board Series 5100”, you have to remove
the camera module first (see optional step ❺ on page 28).
ⓐ
Analog video preview output (BNC, CVBS, 1.0 V
p-p
, 75 Ω)
ⓑ
LAN / PoE (RJ45 jack, PoE conformity IEEE 802.3af)
ⓒ
Contact IN/OUT
ⓕ
RS485 (full duplex, half duplex)
ⓓ
Audio Line OUT (3.5 mm phone jack, for stereo TRS plug)
ⓖ
Power IN (Weidmüller male connector SL 3.50/02/90G)
ⓔ
Audio Line IN (3.5 mm phone jack, for stereo TRS plug)
Optional interfaces “Interface Board Series 5100”:
Standard interfaces: