manualshive.com logo in svg

dallmeier DDF51 0HDV-DN Series, Commissioning

Share
Download
dallmeier DDF51 0HDV-DN Series Commissioning Download Page 18

18

 

© 2018 Dallmeier | www.dallmeier.com 

DDF51(X)0HDV-DN-IM Commissioning

NOTICE

Damage to the device due to improper power supply

Damage to electronic components or serious malfunctions

 

➡

Always ensure the correct polarity when connecting an external 

DC power supply unit.

 

➡

Do not operate the device with Power over Ethernet (PoE) if the 

device is powered by an external DC power supply unit.

Damage to the device or malfunctions due to the lack of or im

-

proper grounding/earthing

Damage to electronic components caused by lightning strikes and 

over-voltages (electrical surges) or malfunctions due to electro-

magnetic interferences

 

➡

Carry out all protective measures for a standard-compliant 

grounding/earthing and a correct equipotential bonding of the 

device in accordance with the currently applicable DIN, VDE and 

ISO standards in order to ensure the safety of the device (pro-

tection against over-voltages) and its immunity to electromag-

netic interferences (EMI).

Summary of Contents for DDF51 0HDV-DN Series





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands