DDF4820HDV-DN-IM/-SM
www.dallmeier.com
72
If necessary, enter the
Ringbuffer size
.
Select an encoder from the drop-down list
image source
to define the source of the
JPEG images.
The used encoder must be enabled (“Encoder 2” is disabled by default) and configured
for MJPEG encoding (see section “
Click
test
to check your configuration.
The test was successful if a new JPEG image is uploaded to the FTP directory you
specified.
Select the
trigger
tab.
Fig. 11-5
Select all relevant triggers which are supposed to initiate an FTP image upload by
activating the related checkboxes.
Finally, confirm with
oK
.
Interval, Duration (sec.)
This trigger option allows you to configure the automatic FTP upload of still images based
on a time interval.
The minimum time interval for FTP image uploads is 1 second.
The less the duration between two FTP image uploads is set, the more the network utili-
zation rate (traffic level, bandwidth consumption) may increase.
