DDF4010HDV
www.dallmeier.com
37
9.1.1
Manual Configuration
If no DHCP server is available in the local area network (LAN) or if you want to assign the
network settings manually, proceed as follows:
Pay attention to the designated and valid IP address ranges in your network.
Ensure that the
DHcP
checkbox is deactivated.
Enter the
iP address
you want to assign to the device.
Enter the
Netmask
.
Enter the
Gateway
address.
Deactivate the
Allow iP-Finder network configuration
3
checkbox if not required.
Finally confirm with
oK
.
The “Hostname” is for internal purposes only. A modification is not necessary.
The connection to the device is terminated and the new network settings are assigned.
9.1.2
DHCP
To automatically assign the network settings by a DHCP server, proceed as follows:
Ensure that an active DHCP server is available in the local area network (LAN).
Activate the
DHcP
checkbox.
Deactivate the
Allow iP-Finder network configuration
checkbox if not required.
Finally confirm with
oK
.
The connection to the device is terminated and the new network settings are assigned by
the DHCP server (pay attention to the lease duration).
The newly assigned IP address can be determined by the MAC address of the device with
the IP-Finder or at the DHCP server.
The IP-Finder must be executed in the same LAN where the device is located.
3
IP-Finder: Dallmeier software for determination and configuration of network-compatible Dallmeier devices
