9. Specifications
Frequency range
12 Hz – 20 kHz
(+/- 0.5 dB, 8 Ω load, 3 dB below rated power)
Connection input(s)
4x Analog unbalanced, RCA
4x Analog balanced, Euroblock connector
1x S/PDIF, RCA
Input impedance
10 kOhm
Output channels
2 x Lo-Z speaker (4 - 16 ohm)
1 x Hi-Z speaker (70V / 100V)
1x S/PDIF digital out, RCA
Maximum speaker cable cross section
2,5 mm
2
/ AWG 14 (Euroblock standard)
Output power @ 2 ohm
2 x 500 W (SE) *
-
(BTL) **
Output power @ 4 ohm
2 x 500 W (SE)
1 x 1000 W (BTL)
Output power @ 8 ohm
2 x 250 W (SE)
1 x 1000 W (BTL)
Output power @ 70V
1 x 1000 W (BTL)
Output power @ 100V
1 x 1000 W (BTL)
Total system power
1000 W
Power consumption
350 W
Output voltage
45 Vrms (SE) - 90 Vrms (BTL)
70/100V (Hi-Z)
Output circuitry
UMAC™ Class D - full bandwidth PWM modulator with ultra-low distortion
Signal to noise-ratio
>108 dB
(A-weighted, 20 Hz - 20 kHz, 8 Ω load)
THD+N (typical)
< 0.05 %
(20 Hz - 20 kHz, 8 Ω load, 3 dB below rated power)
Other features:
Short circuit protection
DC protection
Undervoltage protection
Temperature protection
Overload protection
Rack mountable
Power supply
UREC™ universal mains switch mode power supply with Power Factor Correction (PFC) and standby
converter
Operating temperature
0 - 40° C
Operating voltage/ frequency
Universal mains
100 V-240 V, 50 Hz-60 Hz
Power ratings
1 % THD @ 120 Vac and 230 Vac
Standby consumption
< 0.5 W
Outer dimensions (H x W x D)
88 x 440 x 332 mm
3.5 x 17.3 x 13.1 inches
Weight
5.9 kg
13 lb
Shipping weight
7.5 kg
16.5 lb
Accessories
2x Two channel balanced input connector
1x Two channel speaker output connector
1x GPIO socket connector
1x Mains power cable
4x Adhesive rubber feet
2x Rack mount ears (mounted)
Optional accessories
DALI CONNECT SC F222C (speaker cable)
DALI CONNECT SC F215C (speaker cable)
*SE – conventional, single ended output mode
**BTL – bridge-tied load output mode
29
