8. Advanced Configuration
The
[Dashboard]
displays the amplifier status, output
zones and the configuration menu tabs. It also enables
immediate access to volume control. The advanced
functions available under each configuration menu tab
are described in the following paragraphs.
8.1 AMP CONFIGURATOR [Input]
Tab
The
[Input] Tab
provides
naming, mono/stereo selection,
sensitivity,
and
gain trim
for each amplifier input channel.
An internal pink noise source, provided for system testing
and set up, can also enabled or disabled, and adjusted for
gain via the
[Input] Tab
.
Diagram 8B
illustrates the
[Input]
Tab
.
NOTE
When adjusting input gain, the input level display should
remain green. If it displays red, the input gain should be
reduced.
Diagram 8B
AMP CONFIGURATOR
[Input]
Tab display.
Input name - click / touch to edit
Adjust input gain
Select mono or stereo
Select input sensitivity option
Diagram 8A
AMP CONFIGURATOR
[Dashboard]
display.
In addition to the installation of DALI functional
profiles described in Section 5.3 of this manual, the
DALI PHANTOM CI AMP-2500 DSP can be further
configured to meet a variety of more advanced
installation requirements. The advanced configuration
options are described in the following paragraphs.
Adjustment of AMP-2500 DSP advanced
configuration parameters demands specialist
knowledge and should only be carried-out by
appropriately qualified audio technicians.
Begin by connecting the AMP-2500 DSP to a network
enabled device such as a smart phone, tablet or
computer. Open a web browser on the connected
device and browse to the DALI PHANTOM CI
AMP CONFIGURATOR web interface. The AMP
CONFIGURATOR Dashboard, illustrated in Diagram 8A,
will be displayed.
NOTE
AMP-2500 DSP network connection is described in
Section 5.2 of this manual.
20
