9
UK
DE
DK
4.1 STEREO CONNECTIONS
If you want to use DALI FAZON SuB 1 in a stereo setup, your stereo (pre-)amplifier should have
either a set of stereo RcA line outputs or a mono RcA line output available (please refer to the
instruction manual of your stereo (pre-)amplifier). the line output connector(s) of your stereo (pre-)
amplifier must be connected to the LINE INPut connectors (L+R/LFE) of the subwoofer via one or
two RcA cables (sold separately).
4.2 SURROUND SOUND CONNECTIONS
4.2.1 LINE INPUT (MODE SELECTOR SET TO NORMAL)
use the LINE INPut connectors L and/or R/LFE with the MODE selector set to NORMAL if you want
to adjust the subwoofer Frequency output using the FAZON SuB 1 crossover button.
to use this option, connect the subwoofer output connector(s) of your surround sound (pre-)
amplifier with the LINE INPut connectors on the subwoofer using a RcA cable (sold separately).
If the surround sound (pre-) amplifier has only one subwoofer output connector, connect it to the
LINE INPut L connector (white) of the subwoofer using a RcA cable (sold separately). If there are
two subwoofer output connectors, connect both LINE INPut L and R/LFE connectors using RcA
cables (sold separately).
Please refer to chapter “5.0 Installing and Adjusting” for instructions on how to make the adjustments.
4.2.2 LFE INPUT (MODE SELECTOR SET TO LFE)
use the R/LFE input connector (red), if you want to adjust the subwoofer output from your surround
sound (pre-) amplifier. When the R/LFE input connector is used and the MODE selector is set to
LFE, the built-in crossovers are bypassed and the crossover frequency adjustment button will not
be functioning.
to use this option, connect the surround sound (pre-) amplifier subwoofer output to the R/LFE input
connector on the FAZON SuB 1 with a RcA cable (sold separately). Please refer to the instruction
manual of your surround sound (pre-) amplifier on how to adjust the crossover settings.
4.3 USING TWO SUBWOOFERS
In most cases you will achieve excellent results with one DALI FAZON SuB 1. use of two
subwoofers is possible as a no-compromise stereo solution, or for reproduction of very powerful
sound pressures in a stereo or surround setup in larger rooms.
the connections are basically the same as stated in previous chapters, but for stereo you should
only connect the left channel output connector of your stereo or surround (pre-) amplifier to the
LINE INPut L connector on the DALI FAZON SuB 1 placed to the left in your room. In a similar way
you should connect the right channel output connector of your stereo or surround (pre-) amplifier
to the LINE INPut R/LFE connector on the DALI FAZON SuB 1 placed to the right in your room.
For a surround setup, split the output signal from your surround sound (pre) amplifier using
a RcA splitter (sold separately) and connect the two outputs. In all other respects, follow the
instructions above - but use separate channels. Please consult your authorised DALI dealer if
you have further questions.