DALGAKIRAN TIDY 20B-50, Operator'S Handbook Manual, Page: 99 / 157

42
PARAMETER LIST (CUSTOMER LEVEL)
CODE DESCRIPTION SET VALUE
Wt6 TIMER ON RL6 Sec.
Wt7 TIMER OFF RL6 min.
TOTAL HOURS WORKING HOURS OF MAIN MOTOR Hours
LOAD HOURS WORKING HOURS OF SOLENOID VALVE “ON” Hours
% WORKING HRS LOAD / TOTAL HOURS %
START PER HOUR MOTOR START COUNTER OF PREVIOUS HOUR Qty
FLOW RATE FLOW RATE m³
RELEASE NO NUMBER OF SOFTWARE RELEASE -
REFER TO PREVIOUS PAGES
RESTART (MAN: MANUAL RESTART / AUTO: AUTORESTART)
IN CASE OF POWER SUPPLY LACK THE COMPRESSOR WILL RESTART AUTOMATICALLY OR MANUALLY.
PHASE CHECK (YES: ACTIVE / NO: DISACTIVE)
THE PHASES CONTROLLER UNIT DISACTIVATED IF SELECT “NO”. (THIS OPTION IS ONLY FOR SERVICE USING.) IF
YOU WANT TO USE THIS OPTION PLEASE INFORM THE SERVICE.
LOW TENSION (YES: ACTIVE / NO: DISACTIVE)
THIS OPTION IS FOR CONTROLLING THE CONTROLLER UNIT SUPPLY VOLTAGE. IF THE VOLTAGE INCREASES OR
DECREASES IN ANY REASON, CONTROLLER UNIT SHOWS AN ALARM AND INFORM THE USER.
NO. COMPRESSOR THE SERIAL NUMBER OF COMPRESSOR SAVED HERE.
SET THE AUTOMATIC START AND STOP OF THE COMPRESSOR.
ON THE SECOND ROW THE LCD VISUALIZES THE MESSAGE “OFF – ON”; BY THE BUTTON AND/OR SELECT:
OFF
:
IF YOU NEED TO START AND STOP THE COMPRESSOR BY THE PERTINENT BUTTONS; CONFIRMING THIS
SELECTION BY THE BUTTON , THE LCD SHIFT BACK TO THE MESSAGE “CLOCK TIMER”.
ON
:
IF YOU NEED TO START AND STOP THE COMPRESSOR OPERATED BY TIMER; CONFIRMING THIS SELECTION
BY THE BUTTON THE LCD VISUALIZES THE MESSAGE:
DAY 1
(1 MEANS MONDAY AND 7 SUNDAY)
BY THE BUTTONS AND/OR SELECT THE DAY AND CONFIRM IT BY ; ON THE SECOND ROW THE
LCD VISUALIZES THE MESSAGE:
1 ON 00:00 – OFF 00:00
WITH THE 1ST ON HOUR (HOURS AND MINUTES) BLINKING: SET IT BY THE BUTTON AND/OR ;
CONFIRMING IT BY , THE FIRST OFF HOUR STARTS BLINKING AND IT GETS AUTOMATICALLY THE DATA SET
ON THE FIRST ON HOURS AND SO ON TILL THE LAST OFF HOUR (FOR EVERY DAY OF THE WEEK THREE ON/OFF
SELECTIONS ARE AVAILABLE). CONFIRMING THE LAST OFF HOUR OF THE DAY SELECTED, THE LCD VISUALIZES
THE REQUEST TO
SET THE NEXT DAY
; REPEAT THE SAME PROCEDURE FOR ALL 7 DAYS OF THE WEEK. IF
12) CLOCK TIMER
11) CONFIG COMPRES.
9 ) ALARMS
5 ) WORKING TIMER
3 ) SCREW TEMP.
7 ) WORKING HOURS