DALGAKIRAN TIDY 20B-50, Operator'S Handbook Manual, Page: 77 / 157

20
5.4 DAILY OPERATION
9
At normal days before running your compressor you may perform some simple checks and
afterwards run it. The maintenance activities are explained in the section 6. (Maintenance) “ Daily
Maintenance ” part.
9 Observe that there is no failure warning signal on compressor panel.
9
Observe that there is no oil leak or damage by looking at the internal accessory.
9 Run the compressor and observe how it works for short time.
9 Look at the front panel and observe that operating pressure and temperature values are normal.
9 While the compressor running on load, observe the oil flow at oil return line.
9 These simple checks may cause you to early detection of failures and save you from loss of time
from unnecessary stopping.
5.5 STOPPING THE COMPRESSOR
9 To switch off the compressor press the stop button. Your compressor will first go into idle and stop
within 20-30 seconds. After the compressor stops observe that whether or not there is any
damage, oil leakage etc in the inside by opening the covers.