DALEMANS U-H1, Instruction Manual

Page: 26 / 40

26
www.dalemans.com
|
Configuration of the external alarm
This sub menu is used to configure the behaviour of the external alarm as well as the normal state of
the thereto dedicated input.
 
Extern. alarm Config.
Set alarm level 1
Behaviour of the external alarm
 
External alarm state
Normally closed
Normal state of the input dedicated to the
external alarm
 
•
Behaviour of the external alarm
For details of possible configurations, refer to “ Behaviour of the external alarm ” paragraph in the
information menus.
Selection of the configuration of the external alarm:
Select configuration
Disabled
 
Select configuration
Set alarm level 1
 
Select configuration
Set alarm level 2
 
Select configuration
Set alarm levels 1
&
2
Navigation within the external alarm configurations is via the “ Up ” and “ Down ” buttons.
The configuration is then selected using the “ Enter ” button. Confirmation of the configuration change is
requested.
Select configuration ?
Set alarm levels 1
Pressing “ Enter ” confirms the configuration change.