Dale Power Solutions Ltd
User Manual
16
…………………………………………………………………………………………………………
5. Wire the input and output earth cables to the PE (protective earth) terminals. Ensure that both
connections are made.
Figure 5 Cable connections for E420, E430, E440 and E460 units
Figure 6 Cable connections for E480 units
6. Wire output and battery cables to the terminals as shown in the appropriate diagram above. On E480
units, feed the battery centre-tap cable round the back of the terminal block and wire it to the top of
the left-hand neutral terminal as shown above.
7. Wire the input as follows:
E420/E430/E440/E460: to
Main input
(Figure 5)
E480: to
L1A
,
L2A
,
L3A
(Figure 6)
8. Secure all cables to the punched plate in the bottom with cable ties.
