TRIMAX Classic
Page 20
Lubricate all lubrication points at least once annually.
Hydraulics
Check all hydraulic hoses for wear or cracks. Check all hoses for crimping.
Lubricate exposed rams with oil or pressure-resistant grease to avoid rust
forming when storing for long periods. Remember to remove before use.
Plate hubs
Tighten all plate hubs once annually or as required.
Fig. 16
1.
Remove plates.
2.
Remove split pin from hub
nut.
3.
Tighten hub nut a ¼ turn, or
until there is no play in the
hub.
Wear parts
The tips of the tines are reversible and must be turned before the brackets
they are mounted on are worn.
Replace the wings when they are worn to the extent that they no longer
work properly, or before wear is caused to the bracket.
Replace the plates when they are worn to the extent that they no longer
work properly, or before wear is caused to the bracket.