TRIMAX Classic
Page 16
Operation
Correct operation is vital for optimum use. This applies to working in the
field and for safety. Always ensure you are fully familiar with all safety
aspects of the machine.
We recommend running at a slight angle to the sowing direction for the best
results.
TRIMAX Classic must be set up so that it is supported by the cage roller. The
tractor hydraulic lift handle must be fully lowered when in operation to allow
the lift to move with the movements of the machine. Depth will be control-
led at the back by the cage roller and at the front by the top bar.
When changing the depth, adjustment of the plates may be necessary. The
plates must work on the surface, but perform any tilling apart from smooth-
ing out after the tines, to ensure a suitable amount of soil is thrown back af-
ter the harrow tine.
Operating speed
To achieve optimum tilling, a speed of between 8 and 12 km/h is required.
But always work according to the conditions
.
Please note that wear increases significantly in line with the speed. The cut-
ters can also be damaged if operating at excessive speeds in unfavourable
conditions.
Wear on the tines will increase significantly at high speeds, particularly un-
der dry conditions.