
TRIMAX 520
Page 11
•
Only use the stubble cultivator if all safety devices have been mounted.
Defective safety devices must be replaced immediately.
Hydraulics
•
No persons may be positioned within the operational radius of the
machinery when the hydraulic system has been activated, since there is a
risk of being crushed.
•
Prior to any repair work on the hydraulics unit, the stubble cultivator must
be lowered to the ground, the pressure must be removed from the unit, the
engine must be switched off and the ignition key must be removed.
•
Hydraulic connections must be cleaned thoroughly before connecting.
When connecting the hydraulic hoses to the tractor’s hydraulics, ensure that
the pressure has been removed from the hydraulic system.
•
After repairs on the hydraulic system have been completed, all air must be
completely removed from the system.
•
Check the hydraulic hoses regularly for defects such as tears, cracks, wear
or damage. Defective hoses must be replaced immediately. Never try to
localize a leak in the hydraulics using your hand. Utilize a piece of
cardboard instead. Avoid twisting the fittings when exchanging hoses. Use
2 wrenches to tighten and to loosen.
Fig. 4
•
Avoid spilling oil on the ground. If this should happen, it should be
collected and safely disposed of immediately.
•
Clean hands thoroughly after skin contact with oil and grease. Change out
of oil-soaked clothing immediately, as this can be harmful to the skin.
•
Hydraulic oil that flies out under high pressure can penetrate through the
skin and cause serious injuries. Seek professional medical assistance
immediately in the event of any injury.