DALBO MAXIROLL 530, Manual

Page: 7 / 39

MAXIROLL
Side 7
Safety
The safety alert symbol is used throughout this manual to identify important safety
warning messages concerning your safety, the safety of other users or the func-
tional safety of the implement. Observe all safety instructions and make them
readily accessible to all users of the equipment.
General
•
The operator must be thoroughly familiar with all safety precautions and opera-
tions of this equipment prior to using.
•
The safety signs on the MAXIROLL contain important instructions concerning
your safety, the safety of those around you, and the correct operation of the
machinery.
•
Never allow anyone to ride on the implement during operation or transport.
•
Never allow bystanders within the operating radius of the MAXIROLL when the
implement is in operation. Operate the MAXIROLL only while seated in the driv-
er’s seat of the tractor.
•
Ensure that wing section locks are engaged when the MAXIROLL is in a folded
position. Secure control levers against unintentional operation.
•
Before performing any adjustments, maintenance or repairs on the machinery,
always unfold the MAXIROLL and lower the implement to the ground or secure in
transport position, set the tractor brakes, turn off the engine and remove the ig-
nition key.
•
Remember to secure the drawbar stand and the lift arms (if applicable) with
lynch pins.
•
Operate the tractor and MAXIROLL only while seated in the driver’s seat.
•
Always drive according to conditions.
•
Do not use the MAXIROLL unless all safety signs are installed. Replace defective
safety signs immediately.