DALBO MAXICUT, Manual, Page: 16 / 30

MAXICUT
Side 16
Operation
Correct operation is vital for optimum use.
This applies to working in the field and for safety. Always ensure you are fully famil-
iar with all safety aspects of the machine.
Extending and retracting
Extending and retracting the machine must always be performed with tractor
parked.
Extending
Fig. 4
1 Remove transport chain, extend
side sections to horizontal using
the extend cylinder (hose marked:
red).
Fig. 5
2 Activate extend/retract cylinder
(marked: Red) to fully extend side
sections.
3 Raise wheel frame (marked: yel-
low)

Before commencing rolling, drawbar must be horizontal. When driving with MAXICUT
200/300 lift must always be in a floating position when the machine is in working
position.
By turning with the machine on the headland, the machine has to be lifted up on
the wheel frame to make sure, that the frames will not be overloaded. Slight curve
speed can be made with the machine in the ground.