DALBO MAXICUT, Manual, Page: 15 / 30

MAXICUT
Side 15
Setting up
MAXICUT is very simple to work with. The design makes it very simple to set up, alt-
hough the main frame must be horizontal.
Always check frame angle before use to ensure optimum use of the machine.
Adjusting drawbar
To ensure uniform cutting, the drums must be horizontal on the drawbar. The side
frames can swing in relation to the lie of the field.
Fig. 3
MAXICUT 600 at work. The main frame
is horizontal whilst the side frames
are free to swing.
Incorrect drawbar height can cause uneven compression of the soil, as the roller
will not apply equal pressure for all sections. If the drawbar is low at the back, the
tractor lift arm is too high. If the drawbar is low at the front, raise the tractor lift
arm.
HORIZONTAL