Daktronics Tuff Sport TN-2562, Display Manual

Page: 27 / 62

Scoreboard Troubleshooting 21
Connector # Function
1-16 Output to digits and indicators
17 Control signal
19 Address
Refer to Drawing A-126174 in Appendix A for detailed driver pin out/switch specifications.
When troubleshooting driver problems, three LEDs labeled DS1 , DS2 , and DS3 , provide the
following diagnostic information:
LED Color Function Operation Summary
DS1 Green Power Steady on
DS1 will be on and steady to indicate the driver
has power.
DS2 Red Signal RX
Steady on
or blinking DS2 will be on or blinking when the driver is
receiving a signal and off when there is no signal.
DS3 Amber Status Blinking
DS3 will be blinking at one second intervals to
indicate the driver is running.
Note: While it is necessary to have the scoreboard powered on to check the LED driver
status indicators, always disconnect scoreboard power before servicing.
Figure 16: Driver Status Indicators