Setup and Operation
16
Personal Monitor System Operation (Optional)
Basic instructions are described below and shown in
. For more information, refer
to the
Shure PSM900 Personal Wireless Monitor System User Guide
.
1�
Flip the transmitter
POWER
switch to
ON
if it is not already on; ensure the RF switch to
the left of it is
OFF
at this time.
2�
Power on the handheld receiver using the volume knob.
3�
Attach the antenna and earphones to the top of the handheld receiver.
4�
Flip open the battery cover to expose the control buttons. Press
SCAN
and the display
will show “SYNC NOW”.
Note:
Insert new or fully-charged batteries prior to each use, and always have
spares on hand.
5�
Hold the bodypack up to the transmitter with the sync IR windows facing each other,
and press the
SYNC
button on the transmitter. The display will show “SYNC SUCCESS”
when finished.
6�
Flip the transmitter RF switch to
ON
. The blue LED on the receiver should illuminate to
indicate that it is detecting the transmitter.
1
5
6
3
2
4
Figure 25:
Optional Personal Stereo Monitor System
