Daktronics PC-2002, Manual

Page: 8 / 34

Electrical Installation
4
3 Electrical Installation
Power
The PC-2002 receives external power through a standard 3-prong power cord
plugged into a 120 or 240 VAC outlet (refer to specifications label, Figure 1 , for power
requirements). The outlet shall be installed near the display and easily accessible.
Figure 5 illustrates the dimensions for placing the power receptacle to line up with the
openings in the rear of the display.
12.0"
1"
min.
9.7"
Wall
Side View
recessed
receptacle
Power connection set up with the receptacle
mounted near the PC-2002 display.
Front View
Figure 5: Electrical Installation
Note: PC-2002 displays feature an internal time delay 1/2 amp, 250 V fuse for 120 VAC
models or 1/4 amp 250 V fuse for 240 VAC models. In the unlikely event the fuse
needs to be replaced, contact Daktronics Customer Service.
Wired Signal Connection
The PC-2002 is designed to work with the JC-100 handheld control console, using 22 AWG
two-pair cable (Daktronics part # W-1234). It is also possible to connect signal in from
Daktronics All Sport
®
scoring consoles and OmniSport
®
2000 timing consoles, and signal
out to multiple displays, using 18 AWG shielded cable (part # W-1117).
Refer to
DWG-191740 for detailed signal connection information.