Setting Radio Channels
4
3�
The radio receiver listens for a sever on the following channels, in order:
a�
B# C## - the exact channel the radio is set to via its switches
b�
B# C00 – the broadcast channel
c�
B0 C00 – the master broadcast channel
d�
Diagnostics Channel – see
e�
The sequence then repeats.
4�
The receiver searches until a server on one of those channels is detected. The
DATA
OUT
indicator (red LED) will flash periodically while searching.
5�
Once locked onto a server, the
RADIO IN RANGE
indicator (amber LED) illuminates.
The radio will remain on that channel until the server is removed, powered down, or
the client is powered down.
Note:
Refer to
DWG-1109105
(indoor) or
DWG-1109181
(outdoor) for instructions on
changing the channel and broadcast groups inside the radio receiver.
shows the LED indicators on the radio receiver.
•
POWER
(green LED) – Illuminates when power is applied to the receiver
•
RADIO IN RANGE
(amber LED) – Illuminates when a server (radio-equipped console) is
active on the receiver’s broadcast group channel
•
DATA OUT
(red LED) – Randomly flashes when data is being received from a server;
regularly pulses when searching for a server
2.4GHZ
LL-2567
REV 01
POWER
RADIO IN RANGE
DATA OUT
DAKTRONICS
WIRELESS RECEIVER
Status Indicators
Remove Cover to
Access Switches
Figure 3:
Radio Receiver w/ Cover
