Daktronics All Sport 5100 Page 62 Operation Manual Download

Page: 62 / 149

6-8 Track

Timing

(Continued from previous page)

LCD Display

Action

MENU-TIME OF DAY
TOD hh:mm:ss*

hh:mm:ss

= current setting

Enter the time of day in hours, minutes and
seconds using the selected format on the number
pad and press

ENTER

Press

ENTER

or the down arrow < > to scroll

to the next selection.

MENU-TIME OF DAY
1*GAME 2-TOD

= current setting

Press

<1>

<2>

to display the game clock

(default) or the time of day clock on the
scoreboard.

Press the down arrow key < > to exit the Menu
and return to the game.

MENU-TIME OF DAY
BLANK GAME DATA?

2-tod

is selected, this message will be

displayed.

Press

ENTER

to blank all game data on the

scoreboard except for the Time of Day digits.

6.2 Settings

You may edit the following settings when

EDIT SETTINGS

has been selected from

the Main Menu.

Guest 2 and Guest 3

LCD Display

Action

GUEST 2,3 VALUE
SCORE

←→

EVNT/HT*

This setting determines the function of the
Guest 2 and Guest 3 keys.

When the value is set to

EVNT/HT

, the

scoreboard will display event/heat information.

When the value is set to

SCORE

, the scoreboard

will display scores for guests 2 and 3 on the
scoreboard.

The current value is shown by the location of
the asterisk. Press the left or right arrow key to
change the value to score or event/heat
respectively.

Summary of Contents for All Sport 5100






















































































































































Search results

Summary of Contents for All Sport 5100

Reviews:

Related manuals for All Sport 5100

Brands by name

Popular brands

Daktronics All Sport 5100, Operation Manual

Search results

Summary of Contents for All Sport 5100

Reviews:

Related manuals for All Sport 5100

Brands by name

Popular brands