Daktronics All Sport 5100 Page 16 Operation Manual Download | Manualshive

Page: 16 / 149

background image

1-8

All Sport 5100 Operation

There is never a scenario where groups of scoreboards that were run by
individual controllers need to be run by a single controller. An example of
this type of system is a softball complex with multiple fields and a
scoreboard on each field.

3.

Multiple Controller with Multiple Broadcast Groups:

In a Multiple Controller with Multiple Broadcast (Split Court Operation)
system, there are additional All Sport Controllers that can control multiple
scoreboards. The broadcast group jumper is used to select broadcast group
1 or 2. By changing All Sport settings to a Broadcast address, a single All
Sport Controller can control all scoreboards or specific groups of
scoreboards (defined by the broadcast group.) One example of this scenario
is split court operation in Basketball installations, where scoreboards are
used to score multiple games at once, but can be grouped together to show
one game if necessary. Refer to drawings listed on the previous page for
more information.

The All Sport Console will automatically detect when a radio transmitter is installed
and will prompt the user for transmitter settings.

The All Sport Console will show the current transmitter radio status on the LCD
when a code is entered. An overview of radio settings is shown below.

LCD Display

Action

The LCD will toggle
these screens

* = current edit item

The bottom line shows the
current setting

The default setting is
Broadcast 1 Channel 1

RADIO SETTINGS
BCAST Y CHAN XX

Enter to accept
clear to modify

bcast group 1
radio chan 01

The LCD shows the current radio settings along
with a prompt to accept or modify these values.

If the radio settings are correct, press

<ENTER>.

If these values are incorrect, press

<CLEAR

>

If <

CLEAR

> is pressed to modify the radio

settings, the LCD at the left is shown, allowing
edit of the Channel or Broadcast group setting.

Edit the Broadcast Setting. Use the number keys
to enter the desired broadcast group and press
<

ENTER

> to accept.

Broadcast Group Setting

0-

Master Broadcast – All Receivers

1-

Broadcast Group 1

2-

Broadcast Group 2

The asterisk will move to the channel setting. Use
the number keys to edit this value and press
<

ENTER

> to accept. Edit the channel number to

the desired value and press <

ENTER

> to accept.

(Continued on following page)

«
...
14
15
16
17
18
...
»

Summary of Contents for All Sport 5100






















































































































































Reviews:

No comments

Related manuals for All Sport 5100

Brand: Tense Pages: 4

Brand: WorkChoice Pages: 2

Brand: Helios Pages: 33

Brand: Titan Controls Pages: 4

Brand: Leviton Pages: 2

Brand: Omron Pages: 14

Brand: NuTone Pages: 2

Brand: Theben Pages: 6

Brand: Redback Pages: 12

Brand: RTC Pages: 16

Brand: Intermatic Pages: 2

CountDown Touch

Brand: Interspace Industries Pages: 12

Brand: Interspace Industries Pages: 12

Brand: Hydrofarm Pages: 2

Autopilot TM01715D

Brand: Hydrofarm Pages: 2

Brand: Gira Pages: 8

Brand: AVE Pages: 4

Brand: AVE Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands