19
Testing and Replacing Display Components
6.5 Replacing a Display Fan
Required Tools: Phillips screwdriver, side cutter, cable ties
To replace a fan:.
1. Locate and disconnect the 3-pin Mate-N-
Lok connector. It should be cable tied to the
wire rod with other cables.
2. Cut the cable ties from the wire rod until
the fan power cable is loose.
3. Use the Phillips head screwdriver to loosen
the two fan mounting screws. Refer to
4. Remove the fan from the display.
5. Reverse Steps 1 - 4 to install the new fan.
6. Secure any excess cable to the wire rod with
cable ties.
Fan Mounting Bolts
Figure 14:
Display Fan
