10
Remote Enclosure
8.
Tighten all monitor and DVI cables before powering up. If not tightened properly, a
blank screen appears and the monitor will not recognize the signal.
9.
Turn on the V-Link video processor before the computer or the monitor. If not, it will
affect the DVI signal from the V-Net
®
computer to the V-Link 1500 processor.
Note:
Pressing [
CTRL
] + [
ALT
] + [
F1
] will switch the video card output order to the LCD
monitor on the first output.
10.
If it a two display system, push the button on the KVM switch in the upper left corner of
the enclosure to switch monitors on the LCD.
11.
Login to the router and enter the address supplied by the ISP to allow the router to
connect to the internet.
12.
Disable Norton
®
Internet worm protection.
13.
Ensure the a/c unit (if applicable) is plugged into a different circuit than the remote
enclosure. Also verify that the a/c for the remote enclosure is set between 75° and 80°.
14.
Install the door locks.
Note:
The same key works for both locks.
